Simpson Strong-Tie SET3G22-N SET-3G® 22-oz. High-Strength Epoxy Adhesive w/ Nozzle and Extension

Category Applicators
7254993 7254993
7254993 7254993
- +
Compare

Simpson Strong-Tie SET3G22-N SET-3G® 22-oz. High-Strength Epoxy Adhesive w/ Nozzle and Extension

Item Code: 7254993
SET-3G® is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40°F (4°C) to 100°F (38°C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.
Category Applicators
Manufacturer Ref SET3G22-N
  • Prop 65 WARNING! This product can expose you to chemicals including Bisphenol-A and Epichlorohydrin which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
  • Exceptional performance — superior bond strengths permit ductile solutions in high seismic areas
  • Recognized per ICC-ES AC308 for post-installed rebar development and splice length design provisions
  • Design flexibility — improved sustained load performance at elevated temperature
  • Jobsite versatility — can be specified for all base material conditions when in-service temperatures range from –40°F (–40°C) to 176°F (80°C)
  • Manufactured in the USA using global materials

Fetching product details


Description

SET-3G® is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40°F (4°C) to 100°F (38°C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.

Specifications

  • Brand : Simpson Strong-Tie
  • Category : Applicators
  • Country of Origin : USA
  • Depth : 4.062 in

Fetching product details


Description

SET-3G® is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40°F (4°C) to 100°F (38°C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.

Specifications

  • Brand : Simpson Strong-Tie
  • Category : Applicators
  • Country of Origin : USA
  • Depth : 4.062 in
SEARCH ×